Shallow the operation skill of a few foundations in talking about Inventor

  • Time:
  • Click:206
  • source:DALLMAN CNC Machining
Three-dimensional design software has the Inventor that Autodesk company makes to learn easily, use easily, the advantage with friendly, concise interface. And accessary resource library, can the standard spare parts with more convenient commonly used use. Assemble speed what its use from what get used to a technology to be able to carry excellent and large part considerably more. It is me below the summary that experiences a few skill in use Inventor process and Baconian, the hope can give a reader with certain help, rise, simplify the use of Inventor. One, in the installation process that installs 1)Inventor, requirement user chooses to whether allow to revise model drive dimension in project attempt, if want to revise,this installs hind of make choice of, can reinstall Inventor only. If choose " be " , the user can edit the model dimension that the project pursues. When using this kind of means to revise model dimension, the user cannot see the change of three-dimensional model directly, not quite intuitionistic. Be in especially relevant assembly in the model, the problem such as such as interference cannot get test and verify. Accordingly, foreign advanced company adopts new design work way already increasingly, namely: Allow an architect to revise dimension in three-dimensional model only, update 2 dimension blueprint again next. 2) is when the project method in set Inventor, cannot be opened or build a file and should delete the method file that already chose, want set place to have the way of the part that uses to assembly drawing, ability is found and transfer every part. 3) should be in " build " show new option gets stuck in the dialog box, must be in of Inventor " Templates " one is founded in folder new child folder adds file of a pattern plate this at least child in folder. If be in what him user founds child there is pattern plate file in folder, in " build " in the dialog box, this child the name of folder will not be shown come. 2, draft 1) executive picture is linear, round, circular arc, rectangular after the command, in the toolbar " type " next pulling in option, optional " common " or " tectonic " ; Picture feature is optional " aperture center " or " draft is nodded " , current measure is tagged optional " common " or " referenced " . 2) is being drawn newly graph and already levels of some graphical end points or upend are opposite approximately neat when, inventor can fly off automatically temporarily auxiliary dotted line, in be similar to Auto CAD " the object is tracked " function. 3) is carried out " linear " when the command, choose on round, circular arc a bit, the edge is tangential procrastinate move, can go to the lavatory the picture gives tangent, edge radial procrastinates move, can go to the lavatory the picture gives vertical line. 4) " linear " command besides can draw linear outside OK still move line end points to come through pressing Zun Jian to procrastinate the athletic contrail of inductive mouse, inventor gives circular arc from animation. Reader of this skill need practices more, meet what use adroitly slowly. 5) clicks right key on the toolbar, choose " accurate input " , when scale draft, importable exact value. OK also " accurate input " in putting park tool pen, go to the lavatory to often be used. 6) " cut out " the order is first cut intersect place, cut next delay appearance to hand in place, delete otherwise; "Outspread " the command supports extension line outspread. Both has trends to preview a function, can press Shift key to be in both between switch. Cut mediumly unlike Auto CAD, want to choose cut border first. 7) is in " dimension is tagged " dimension can be clicked below means, in " choice " dimension can be doubleclicked below means, have an edition to single measure. Optional also choose " parameter " toolbar, have an edition to all dimension. If this dialog box is opened when editing a spare parts, "Model parameter " inside the parameter name that can show the model already had parameter, unit, value or parameter relation, when if be in,component environment falls, the tie concern parameter that the meeting in this dialog box shows the component is medium. Those who pass Xiang Mou parameter " formulary " add in column picture " (A/2)+1 " (the name that A is another parameter) such parameter concerns to be able to realize the correlation between parameter. "/ P " can be in " user parameter " in the variable that serves as public parameter, the method is: First pitch on " user parameter " label, click a dialog box again below " add " pushbutton, with respect to the parameter that can increase an user to be defined oneself. Of course, also can define in watch of thing preexistence Excel a series of parameter, the method is the group that expresses from Excel, the first begins, the first label parameter name; Value of the 2nd number or formula; The 3rd label an unit: The 4th label remarks. Be in next " parameter " click in the dialog box " link " pushbutton will search and join this Excel is expressed, "Parameter " the method that occurrence Excel of the meeting in the dialog box expresses, listed all Excel express the parameter inside below method. Such OK point at gives a commonly used part, thereby through altering parameter reachs a fast figure. 8) is in draft environment, except support " the dot is chosen " outside means, still support " the window is chosen " and " casing is chosen " means, but can odd anthology, the first time when choosing the 2nd times namely chooses to be cancelled. After choosing for the first time, be about to raise a target to option market, can press Shift to be nodded again choose the target that did not choose, want to delete option market to already chose a target, usable press Shift to be nodded again choose the target that already chose. Press Shift to undertake window choosing and casing are chosen, inventor meeting general already chose an object to procrastinate move. The edge of all 9) models can serve as referenced edge directly, will not be not the geometrical graph inside draft plane surely umbriferous undertake restraining to the ability inside draft plane. 10) is in draft environment, after choosing a target, usable Zun Jian is based on draft the tie to procrastinate move for anticipated figure. 11) chooses draft first, choose through right key menu " suit oneself " , can set draft to be get used to draft oneself, when making the feature is being assembled, undertake self-reacting. 12) chooses draft first, choose through right key menu " draft of new fixed position " the draft plane that can move a draft that already existed to differ or working plane. 13) is passed " open " command or click in Inventor " insert Auto CAD file " the draft that pushbutton can regard Inventor as the Dwg graph of AutoCAD will use, can " semi-automatic " the ground builds three-dimensional model. But generally speaking, if the graphical file that gets can be made in AutoCAD, also can open this file in Inventor so. 14) should change the Dwg figure of AutoCAD after be Inventor draft, dimension line shows do not come out. Can use in original Dwg document " scamper leaves " command, choose the carriage return after every dimension is tagged, after saving file to disk, change to the middle of Inventor again can solve a problem. Also can download " Invprep.

Zip " patch file, in AutoCAD to load carries out Invprep.

Lsp, reoccupy Inventor is opened, all dimension line can be shown come. 15) should change the Dwg figure of AutoCAD after be Inventor draft, when undertaking draft feature is operated, "Design doctor " may raise a few questions to draft, make the operation cannot undertake. Because the graph is changed,this is when, not will " open DWG documentation option " dialog box most of the lower end " tie end points " choice casing pitch on, make formation draft does not close thereby. The umbriferous line in pursueing because of big project is complex, "Tie end points " the draft that the meeting after choosing casing pitch on makes form is revised hard, accordingly " tie end points " there is clew after choosing casing: "To big project the graph does not suggest to use " . 16) draft can be included multiple close and allow to be handed in oneself, when draft feature is operated, press " draft outline " pushbutton can close to sheet is chosen or be being chosen more area undertakes operating. When 17) is operating draft feature, optional choose already used the sketch that pass, make many features share a draft thereby, can repeat use draft. 18) establishs the parameter that includes trigonometric function, but parameter watch does not accept place to use formula. To solve this problem, need to be done to formula some alter. This formulary computation must have linear unit as a result. To make parameter is calculated the result has linear unit, can multiply formula with 1. If be not done so, formula general can create the value that does not have an unit only (or the value of boundless key link) . Because Inventor thinks " 1 " namely 1 inch (or millimeter) meaning, so this formula will be generated with inch (or millimeter) the value that is an unit. 19) " section observes " with draft plane analyse cuts a graph to make the graph before draft transparent, facilitating observation. 3, use default coordinate is like when modelling of spare parts of spare parts, Ban gold 1) is, serve as center with origin, criterion OK when building other feature more use referenced coordinate plane conveniently. 2) " the job is planar " have intelligent inference function, for instance 1) choose one plane, procrastinate move, inference gives the plane of the distance into as planar as this parallel; 2) the one parallel outside choosing one plane to reach its is linear, inference has been become become the plane that gives point of view with plane point-blank; 3) choose to be mixed point-blank a columnar face, the system crosses place choosing to work tangently with columnar face point-blank into with respect to automatic inference planar; 4) choosing is nodded and linear (or working axis) , the system crosses place to choose dot and place into with respect to automatic inference linear (or working axis) perpendicular job is planar; 5) the user chose a face is nodded with, the system is automatic the working plane that inference crosses place to choose dot and place to choose planar parallel into. 3) makes plane of job of inference of tectonic line, dot, after finishing, set for sightless, but cannot delete. 4) is three-dimensional sweep outline of the draft when sweeping past and method (working axis except) must be inside same draft plane. 5) sweeps the draft that sweeps past need to had not been used two above are it is thus clear that. 6) is in the browser, choice feature clicks right key, choose " duplicate " menu, right key is clicked in graphical window, anthology " stickup " or pull the feature directly when graphical window, need to give plane of a draft to have fixed position. 7) can procrastinate directly in the browser move a feature to have new sort. 8) is in environment of spare parts modelling, optional in " application / Ban gold " menu turns into Ban gold to design an environment; The environment is designed in Ban gold with manage, pitch on " application / spare parts modelling " menu turns into spare parts modelling to design an environment. 9) edits the feature in graphical window to can come through doubleclicking (Ban gold feature is OK also) , must install choice filter to be a feature first state, namely from tool pushbutton " choose " next choices in pulling menu " the feature is first " . 10)Inventor is in " format " lamplight, material was provided below menu option of qualitative, color, but the apply colours to a drawing that does not offer the light to dog, because Inventor is medium almost every kinds of material was offerred character common handle two kinds with polishing, when appointing ablaze material to pledge, will automatic use reflex sticks a graph, produce actual result, the light that does not need to cost dogs computation. 4, assembly drawing and decompose view 1) spare parts to must be in the component, ability is set to suit oneself, the process is pick a part > click right key > anthology " suit oneself " menu. Launch this part, the choice is adaptive feature or draft, click right key, anthology " suit oneself " menu. Want finally adaptive the object must have proper tie, cannot restrain completely again, ability assures to suit oneself by the design. And a spare parts, only one cites can set to suit oneself. If the spare parts cites to already was set,be suit oneself, other cite " suit oneself " menu is not optional. 2) clicks a browser medium " design view " can save the indication configuration of current part to design view file. When need, in clicking a browser " design view " by next pulling menu, file of optional design view. 3) assembles the design that recombines a feature to make the user can convey him with first-rate means to ask. The user can be in follow one's inclinationsly each child assemble between the spare parts that pulls the need that change place, with more apace undertakes those who match installing redesign. component immigrant child the component makes demote, move component piece child the component makes upgrade. Component chooses in the browser, by TAB key demotes, by Shift+TAB key upgrades, or click right key, anthology " demote " or " upgrade " . 4) is clicked in assemble " build component " , can construct with the surface of other part as draft plane feature, make found the photograph adjacent spare parts in assembling more agile. The gets used to layout to include draft and complete definition through generation oneself three-dimensional model of 5)Inventor is assembled simplified working flow. 6) can activation to be restrained automatically in the user in Inventor. Pass automatic tie, it is OK that the user needs to pull component pull component only apace cooperates, need not input tie command. Additional, added newly " the spare parts is assembled exterior consult " , it is booked mediumly in the spare parts with memory justice knowledge will judge how to have link with the other part in the component. Insert this spare parts when the user, systematic intelligence ground is caught insert the position. Also can withhold these intelligence to restrain and replace this part with other part. 7) if the body of a certain geometry in graphical window by pitch on, click right key to will not show " the end edits " associated menu. Click graphical window and cancel the pitch on position of all geometry body. The end edits a spare parts and can call so " the end edits " associated menu. 8) shift, component allows to move temporarily or rotate operation, click " update " hind, the component that is restrained returns former position; Also but permanent shift or rotate, namely " update " hind component stops in new position. 9) is being assembled right key is clicked to choose on the tie " drive is restrained " , can undertake should be restraininged emulation; Spend according to package freedom procrastinate use specific component, can undertake the orgnaization is emulated. 10) can make indication subassembly process decompose animation. 11) decomposes view in " adjust spare parts position " > " direction " operation but coordinate of X, Y, Z medium one axis is adjusted with trochoid coincide. 5, project attempt 1) builds Standard.

Idw file, choose " the format is custom-built caption column " after menu, in clicking draft toolbar " attribute region " " character " input character explains, be in " file / attribute " in menu " custom-built " in label page custom-built variable. After building blueprint pattern plate, make the attribute of the spare parts direct the proper place that writes blueprint caption column. 2) builds Standard.

Idw file, choose " format standard " menu, be in " draft standard " the choice in the dialog box " list " label page, undertake list expresses head and watch custom-built, when building a project to pursue, through " project annotate " medium " list " pushbutton inserts list. 3) if each component in component model has different measurement unit, project attempt pattern is met burden these units, so that be in project attempt environment,model dimension has unified unit. The measurement unit in wanting document of change project attempt shows: Choose " format standard " menu, be in " draft standard " the choice in the dialog box " common " label page, be in " unit " inside area, " linear " set into wanted indication unit form. 4) is clicked " draft " pushbutton, appear on draft draft reseau, "Draft " tool column is activationed. Can found draft layer blueprint, so that give project attempt to add graph and written language, do red line annotate on, these operations won't affect each view of project attempt. In Inventor, found object of draft layer blueprint to be able to be in " style " next brace are chosen corresponding graph layer, the custom-built and optional choose of this graph layer " format standard " menu, in " draft standard " the choice in the dialog box " general " label page undertakes. 5) is founding view dialog box in, "View type " by " change view direction " pushbutton uses generation to define view oneself, the coordinate that alters a document namely is. 6) is founding view dialog box in, choose " apply colours to a drawing " , apply colours to a drawing the ability of any blueprint view is Inventor one of a few powerful features. 7) is in lay cutaway view while press Ctrl key, so that make,it is opposite with father view neat. Place cutaway view to be able to make analyse of a flight of stairs, rotate analyse, inclined analyse and local analyse. 8) " the tool is right neat view " have " disconnect " option, found child view from time to tome with father view " disconnect " option, but will child view and father view disconnect. 9) job plane can use at founding to pass interior temporarily analyse cuts view. When 10) undertakes Ban builds a project to pursue, can choose through the dot " add view " spread out graph correlation to come in. 11) founds view, new view on different blueprint when, choose father view above all, click right key to choose next " build blueprint " pushbutton. New blueprint is activationed, can preview view set the position. 12) is in the browser, use the order that can arrange blueprint afresh through procrastinating, can procrastinate move view to arrive on another blueprint, but the mouse must be unlocked when cursor shift arrives on the name of blueprint or icon, ability makes of view procrastinate move effective. On view or blueprint, click right key to choose " duplicate " but it stickup pursue medium to another project. 13) moves cursor to an arrowhead. Turn into when cursor when arrowhead, doubleclick a mouse, open " change arrowhead " dialog box. Choose arrowhead form from inside menu. 14)Inventor can eliminate certain blueprint when print, right key clicks the blueprint in the browser, choose from inside associated menu " editor blueprint " choice " do not grant to print " . I had not discovered there still are many skills in the use of Inventor, we are actually OK in regular use Inventor " help " function, its help function also is very powerful. Add recently product of a few Inventor, more offer " animation demonstrates " function, more intuitionistic help we go learning. Believe the person that will use Inventor henceforth will be increasing. CNC Milling CNC Machining