The edge that can machine 8D deep aperture changes type broach uses arbor

  • Time:
  • Click:48
  • source:DALLMAN CNC Machining
Tool of material of 3 water chestnut (MITSUBISHI MATERIALS TOOLS) changes in the light of its edge type broach " WSTAR Insert Drill " new rolled out can machine deeper than before L/D ＝ of 8 deep aperture " WSTAR Insert Drill 8D uses arbor " . The WSTAR with 3 original water chestnut but dislocation broach has the 3 times arbor with series of two 5 times length, since January 5, 2007, rolled out the arbor of new 8 times length, their expectation is inside the first year when roll out, the sale of this kind of arbor can reach yen of 2 ten million. 3 water chestnut discharge bits chamfer appearance through improving, make cutting tool holds a good sex that discharge bits and tigidity concurrently. Come so, can machine the deep aperture that is as deep as 8D. This product stock 17 kinds of model, representative F14 ～ 14.

4mm drill pipe contains duty value for 45, 465 yen, f19.

5 ～ 20.

The drill pipe of 4mm contains duty value for 52, 395 yen, f29.

5 ～ 30.

The drill pipe of 4mm contains duty value for 57, 750 yen. The part that approachs the crucial point makes a bits chamfer that 8D uses arbor can be cut petty the section figure that cuts bits, and in back end place criterion section enlarge wide, make cut bits easily eduction. Additional, through undertaking flowing processing to discharging bits chamfer place, more facilitating eduction cuts bits. The appearance that still improved arbor periphery appearance is bright and clean degree, cut bits dissolve in order to prevent to wear. CNC Milling CNC Machining