ISCAR metal company rolls out a kind to have tangential the new-style milling system of razor blade of LNKX of form of clamping apparatus, butterfly. Razor blade of form of this kind of new-style butterfly and phase of current razor blade of flat circle horn are very more than having advantage, its original geometry figure has more cutting side, use before horny knife face, can reduce cutting force, reason razor blade has better cutting performance. This kind of razor blade uses clip of helix clamp device is held in all sorts of milling cutter circumferential on, apply to heavy-duty cutting treatment. This milling system can be used at the planar milling of the milling cutting a shoulder of 90 ° and 45 ° oriented horn. Each razor blade has 8 cutting side, among them 4 are used at left cutting. At the same time the cutting blade of two front center bit accurately clamp is in cutter hub; The cutting blade that the two front center of across tilts is shown the horn before axial. This kind the design of the horn before axial reduced cutting force, can undertake soft cutting is mixed consequently more cut workpiece material easily, changed the way of force, suit to apply in have platform system and on the machining center that with common product line photograph comparing has taller tigidity. System of this milling uses two kinds of bit: LNKX1107 and LNKX1506, the length side their the biggest cutting is 11mm and 15mm respectively, the cutting that can be used at value of the biggest ply to be 10mm and 14mm (the length that uses an in part only normally) , high accuracy and better exterior quality are had after bit classics is abrade. CNC MillingCNC Machining